Série DHR

DHR15 DHR12M DHR10
Speaker type 2-way, Bi-amped Powered Speaker, Bass-reflex 2-way, Bi-amped Powered Speaker, Bass-reflex 2-way, Bi-amped Powered Speaker, Bass-reflex
Frequency range (-10dB) 44 Hz - 20 kHz 55 Hz - 20 kHz 52 Hz - 20 kHz
Coverage area H90゚ x V60゚ H90゚ x V90゚ H90゚ x V60゚ (Rotatable)
Crossover 1.8 kHz: FIR-X tuning™ (linear phase FIR filter) 1.8 kHz: FIR-X tuning™ (linear phase FIR filter) 1.9 kHz: FIR-X tuning™ (linear phase FIR filter)
Maximum Output Level (Measured peak, IEC noise@1m) 131 dB SPL 129 dB SPL 128 dB SPL
Components LF Diameter: 15" cone, Voice Coil: 2.5", Magnet: Ferrite Diameter: 12" cone, Voice Coil: 2.5", Magnet: Ferrite Diameter: 10" cone, Voice Coil: 2", Magnet: Ferrite
HF Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite Diaphragm: 1.75", Type: 1" throat coaxial compression driver, Magnet: Ferrite Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite
Amplifier class Class-D Class-D Class-D
Power rating Dynamic 1,000 W (LF: 800 W, HF: 200 W) *1 1,000 W (LF: 800 W, HF: 200 W) *1 700 W (LF: 500 W, HF: 200 W) *1
Continuous 465 W (LF: 400 W, HF: 65 W) 465 W (LF: 400 W, HF: 65 W) 325 W (LF: 260 W, HF: 65 W)
Cooling Fan cooling, 4 speeds Fan cooling, 4 speeds Fan cooling, 4 speeds
Power consumption 74 W (1/8power), 18 W (Idle) 74 W (1/8power), 18 W (Idle) 60 W (1/8power), 18 W (Idle)
Power requirements 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz 100 V, 100-120 V, 220-240 V, 110/127/220V (Brazil), 50/60 Hz 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz
A/D D/A Converters 24 bit 48 kHz Sampling 24 bit 48 kHz Sampling 24 bit 48 kHz Sampling
Processors HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Cabinet material Plywood Plywood Plywood
Acabamento Durable Polyurea Painting, Black Durable Polyurea Painting, Black Durable Polyurea Painting, Black
Handle Side x2 Side x1 Top x1
Pole socket Φ35 mm x2 (Bottom, 0° or -7°) Φ35 mm x1 (Side) Φ35 mm x1 (Bottom)
Rigging Top x 2, Rear x 1 (Fit for M10 x 30 - 50 mm Eyebolts) - Top x 2, Rear x 1 (Fit for M10 x 30 - 50 mm Eyebolts)
Floor Monitor Angle - 57° -
Dimensions W 432 mm (17.0") 500 mm (19.7") 305 mm (12.0")
H 692 mm (27.2") (with rubber feet) 343 mm (13.5") (with rubber feet) 494 mm (19.5") (with rubber feet)
D 405 mm (15.9") 454 mm (17.9") 300 mm (11.8")
Net weight 24.0 kg (52.9 lbs) 16.5 kg (36.4 lbs) 15.0 kg (33.1 lbs)
Options - - U-bracket: UB-DXRDHR10
  • *1: Total peak power of individual outputs (AC 120V, 25 ℃). This value was measured at minimum load impedance, with protection released.