All three models are available in either US or EU standardized sizes, built to meet the specifications of most regions around the globe.

DCP1V4S Painel de Controlo Digital

Painel mural de controlo digital para a Série MTX

DCP4S Painel de Controlo Digital

Painel mural de controlo digital para a Série MTX.

DCP4V4S Painel de Controlo Digital

Painel mural de controlo digital para a Série MTX

DCH8 Digital Controller Hub

Divides the control line from host devices such as the Yamaha MTX/MRX series into up to 8 lines.

PGM1 Paging Station Microphone

Microfone comunicador que pode ser utilizado com os MTX5-D ou MRX7-D.

  • Dante network support
  • 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
  • Up to 4 units can be connected per system
  • PoE powered
  • Dimensions: 132(W) × 56(H) × 154(D) mm (excluding mic)
  • Weight: 1.2 kg (including mic), 1.0 kg (excluding mic)

PGX1 Paging Station Extension

The PGX1 is a paging station extension that can be used with the PGM1.

  • Function expansion for the PGM1
  • 8 buttons can be assigned to any functions *Output destinations and input sources are specified via the MTX-MRX Editor
  • Up to 2 units can be connected to each PGM1
  • Dimensions: 132(W) × 56(H) × 154(D) mm
  • Weight: 0.9 kg (excluding connecting bracket)

MCP1

Wall-Mount Controller

  • 6 buttons can be assigned to perform control functions (via ProVisionaire Design or MTX-MRX Editor)
  • Multi-language displays supported
  • Four user levels for access management
  • Up to 16 units can be connected per system
  • PoE powered
  • Back can adapter supplied
  • Dimensions: 149(W) x 125(H) x 18(D) mm
  • Weight: 0.5 kg

SWR2100P-10G L2 Switch

The SWR2100P series network switch equipped with ten RJ45 ports.

  • Ports available for PoE power supply: 1-9 / Up link port: 9 port
  • Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)

SWR2100P-5G L2 Switch

The SWR2100P series network switch equipped with five RJ45 ports.

  • Ports available for PoE power supply: 1-4 / Up link port: 5 port
  • Maximum 30W can be supplied from each PoE-compliant port (All ports 70W)

SWR-2311P-10G Switch L2

As definições recomendadas para uma utilização do sistema de rede Dante (tais como QoS, EEE e IGMP Snooping) podem ser ajustadas facilmente com este switch.

  • LAN ports equipped with PoE supply: 8(1-8)
  • LAN/SFP combo ports: Portas LAN / SFP combo: 2 (9, 10) (A porta LAN e o slot SFP são usados exclusivamente)
  • A fonte PoE é compatível com IEEE 802.3at e pode alimentar todas as portas PoE até 30W
  • Servidor RADIUS integrado para uma gestão avançada de segurança

EXi8 Input Expander

Os expansores de entrada EXi8 convertem áudio analógico de microfone/linha em áudio digital, e transmitem o sinal, utilizando o formato YDIF da Yamaha. Os pré-amplificadores dos EXi8 podem ser controlados a distância, a partir de um processador MTX, via um cabo Ethernet.

EXo8

Expansores de saída EXo8, com 8 canais de conversores DA, que produzem áudio analógico de elevada qualidade, convertendo a saída digital dos processadores da Série MTX, através do YDIF.

Exi8/ Exo8 Specifications

  EXi8 EXo8
Sampling frequency 48kHz/44.1kH
Signal delay Less than 2.5ms
Total harmonic distortion Less than 0.05% (+4dBu , Gain:-6dB); less than 0.1% (+4dBu , Gain:+66dB)
Frequency response 20Hz to 20kHz, -1.5dB min, 0dB typ., +0.5dB max
Dynamic range 107dB (Gain:-6dB)
Equivalent input noise (EIN) -126dBu (Gain: +66dB)
Phantom power +48V (per channel; individually settable)
Crosstalk -100dB (@1kHz)
Heat dissipation (per hour) 21.5 kcal max.
Power supply voltage 100V 50/60Hz
Power consumption 25 W max.
Dimensions (W x H x D) 480(W) x 44(H) x 351(D)mm, 1U 480(W) x 44(H) x 351(D)mm, 1U
Included items Power cord, Euroblock plugs (3-pin, tabbed) x8

EXi8 Analog Input Specifications

Input terminal GAIN Actual load impedance For use with nominal Input Level Connector
Nominal Max. before clip
INPUT 1-8 +66dB 10kΩ 50-600Ω Mics & 600Ω Lines -62dBu -42dBu Euroblock
-6dB +10dBu +30dBu

EXi8 Digital Input Specifications

Terminal Format Level IN/OUT Connector
YDIF In YDIF RS-422 16IN RJ45

EXo8 Analog Output Specifications

Output terminal Actual Source impedance For use with nominal Output Level Connector
Nominal Max. before clip
OUTPUT 1-8 75Ω 10kΩ Lines +4dBu +24dBu Euroblock

EXo8 Digital Output Specifications

Terminal Format Level IN/OUT Connector
YDIF Out YDIF RS-422 16OUT RJ45

Exi8 / Exo8 Control I/O Specifications

Terminal Format Level Connector
Network Ethernet 100Base-TX - RJ-45